Billy Goat Z FORCE FZ1300H, Руководство пользователя

Страница: 9 / 15

Part No 442503 Form No F081512A
9
Z FORCE BLOWER Owner’s Manual
BLOWING OPERATION
Your Billy Goat Z Force blower is equipped with a motorized air director nozzle to allow the operator to direct the air
stream by rotating left or right as required to assist in moving debris. This feature is extremely useful when having to
move debris in various directions.
ADJUSTING AIR DIRECTOR
To change the air direction use the foot pedal switch to rotate the nozzle clockwise (CW) or counter-clockwise (CCW).
Use the red indicator as a visual guide to show which way the nozzle is pointing when out of view.
Note: Switch must be
hooked up to battery in order to function.
DO NOT position exhaust nozzle to where it will blow debris towards people, vehicles or other objects in vicinity. Flying
debris may damage, harm, or cause injury to people or objects in air flow range.
Always
make sure the kickstand is up before unit is put in motion to raise the kickstand pull out the pin and rotate the
kickstand up towards the blower. Locate the hole that holds it in the upwards position and re-insert the pin. Likewise,
before detaching the unit from the mower make sure the kickstand is down and locked in position.