Billy Goat Termite TKD505H Скачать руководство пользователя страница 6

Part No. 890313                                                                                                                                                           Form No. F010396D

Page 6 of 12

OPERATION

  

continued

16

16

16

16

16

Note:  Frequently empty debris to prevent bag overloading with

         more weight than you can lift.
An optional bag and dust cover is available for use where debris will
be vacuumed in dusty conditions (see Optional Accessories shown
on   page 1)
.

DO NOT place bag on or near hot surface, such as engine.

  Run

engine at 1/2 throttle for first 1/2 hour to condition new bag. 

 Your new

bag requires a break-in period to condition the pores of the material

against premature blockage. 

 

 The entire bag surface serves as a

filter,  and must be able to breath to have good vacuum performance.

Be sure engine has come to a complete stop before removing
or emptying bag.

This vacuum is designed for picking up trash, organic
material and other similar debris 

(see Safety Warnings 

page 2-3).

However, many vacuums are used where dust is mixed with
trash.  Your unit can intermittently vacuum in dusty areas. Dust
is the greatest cause of lost vacuum performance.  However,
following these rules will help maintain your machine's ability
to vacuum in dusty conditions:

Run machine at idle to quarter throttle.

The debris bag must be cleaned more frequently.  A vacuum

with a clean, pillow soft bag will have good pickup perfor-
mance.  One with a dirty, tight bag will have poor pickup
performance.  If dirty, empty debris and vigorously shake bag
free of dust.

Machine or pressure-wash debris bag if normal cleaning

does not fully clean bag.  Bag should be thoroughly dry before
use.

Having one or more spare debris bags is a good way to reduce down
time while dirty bags are being cleaned.

DO NOT  leave debris in bag while in storage.

Debris bags are normal replaceable wear items.

DEBRIS BAG

16.

16.

16.

16.

16.3

3

3

3

3

(fig. 3)

Wood chips made from branches in your own yard make  excellent
mulch.  A thick blanket of wood chips around plants and flowers
keeps weeds out and moisture in (see fig. 3).

Vacuumed leaves, grass and other organic material from your own
yard can be emptied into a pile or composter to provide enriched soil
for later use as fertilizer in gardens and flower beds (see fig. 3).

Note:  Allow green chips to dry before spreading around living plants.

  MULCH

COMPOST

16.

16.

16.

16.

16.9

9

9

9

9

16.

16.

16.

16.

16.10

10

10

10

10

(fig. 2)

Note:  Dry wood is
harder to chip than
green wood.  (SP model
shown)

Содержание Termite TKD505H













Отзывы: