background image

Part No. 430232                                                                                                                                                                    Form No. F062397A

Page 3 of 8

For your safety and the safety of others, these directions should be followed:

Use of Ear Protection is recommended while
operating this machine.

Do not operate this machine without first reading
owner's manual and engine manufacturer's manual.

       Use of Eye and breathing protection is recom-
        mended when using this machine, especially in
dry and dusty conditions.

GENERAL SAFETY

9

9

9

9

9

PACKING CHECKLIST

11

11

11

11

11

·DO NOT place hands or feet inside air intake opening, near
  exhaust outlet or near any moving parts.
·DO NOT start engine without deflector attached to exhaust
  outlet.

                    PUT OIL IN ENGINE BEFORE  STARTING

Read all safety and operating instruc-
tions before assembling or starting this
unit.

10

10

10

10

10

ASSEMBLY

Your Billy Goat is shipped from the factory in one carton,
completely assembled except for the upper handle, and handle
brace.

These items should be included in your carton.
If any of these parts are missing, contact your
dealer.

Boxing Checklist

Check

Parts Bag  &

Literature Assy

430231

Denotes parts found in
Parts Bag Assembly
(shown on page 4).

Handle Upper

Assembly

430235

Check

Handle Brace

400951

Engine

Manual

·DO NOT direct exhaust outlet toward any bystanders.
·DO NOT operate this equipment without first inspecting
  work area.
·DO NOT operate this equipment during excessive vibration.
·DO NOT start engine without housing front plate attached.
·DO NOT operate this machine on slopes greater than 20%.
·DO NOT blow any hot or burning debris, or any toxic or
 explosive material.
·DO NOT allow children to operate this equipment.

1. Install upper handle (Item 28), to preassembled lower handle  (item 29),
using two screws (Item 17), and two lock nuts, (Item 32). Hand tighten only.
2. Install front of handle brace (Item 30), to blower housing using one
screw (Item 17), one washer (Item 58) and one lock nut (item 32).  Install
rear of handle brace (item 30) to upper handle using two screws (item 17),
two washers (item 58), and two lock nuts (item 32).
3. Securely tighten all hardware listed above in steps 1 thru 2.
4.Connect spark plug wire.

Check

Check

Briggs & Stratton

5 HP

Parts Bag

& Litera-

ture Assy

Multi-Language
     MS9249

Содержание QUIET BLOW QB553









Отзывы: