background image

Part No. 790161                                                                                                                                                                    Form No. F032399A

Specifications

Page 1 of 12

Operator Owner's Manual

T h a n k   Y o u   f o r   S e l e c t i n g

T h a n k   Y o u   f o r   S e l e c t i n g

T h a n k   Y o u   f o r   S e l e c t i n g

T h a n k   Y o u   f o r   S e l e c t i n g

T h a n k   Y o u   f o r   S e l e c t i n g

The Powerful 

QL Series Truck Loader Vacuum

QL2000VE

Optional Accessories

INTAKE

TRAILER

TRAILER QL

P/N 790112

Heavy duty spring axle trailer designed for towing your QL.
Allows unit to be mounted for pickup from rear and both sides.

HOSE REPLACEMENT KIT

P/N 790211

Standard on QL units. [12"(305mm) x 10' (3.0m)]

EXHAUST HOSE KIT P/N 790114
[8"(203mm) x 5' (1.5m)] 

Quick release coupler and flexible

steel hose increases exhaust distance.

EXHAUST

UNIT SIZE (ASSEMBLED W/EXHAUST, NO HOSE):

OVERALL LENGTH:

58"(1.47m)

OVERALL WIDTH:   32" (0.81m)

OVERALL

HEIGHT:

74" (1.82m)

QL2000VE

ENGINE:  H.P.

20 H.P.

 TWIN OHV VANGUARD

ENGINE:  WEIGHT

79 lbs. (35.83 kg)

ENGINE:  TYPE

Briggs & Stratton 4 Cycle IC Twin W/electric start

ENGINE:  FUEL CAPACITY

8 qt.(7.57 L), Fuel pump

ENGINE:  OIL CAPACITY

1.5 qt. (1.4 L), Oil pump w/filter

ENGINE:  MODEL NO.

351447-1171-E1

UNIT

     SHIP

UNIT WEIGHT:

246 lb (111.6 kg)

- - - - - - - - - -

HOSE W/NOZZLE WEIGHT:

59 lb (26.8 kg)

- - - - - - - - - -

ELBOW WEIGHT:

40 lb (18.1 kg)

- - - - - - - - - -

TOTAL WEIGHT

:

379lb (171.9 kg)

405 lb (185.6 kg)

BATTERY NOT INCLUDED:

REQUIRES 12 V BATTERY, 40 AH, 240 CCA MIN.

Содержание QL2000VE













Отзывы: