Part No. 350245 Form No. F021604A
Page 4 of 12
These labels should be included on your Power Rake. If any of
these labels are damaged, replace them before putting this
equipment into operation. Item and part numbers are given to help
in ordering replacement labels.
Label Danger
Keep Hands
and Feet
Away
Item 51 Part
No.400424
Label Do Not Fill While
Engine Is Hot
Item 50 Part No.400268
EXPLOSIVE FUEL
STOP ENGINE AND ALLOW T O
COOL BEFORE REFUELING.
400268
WARNING
14
15
INSTRUCTION LABELS
ENGINE LABELS
DANGER
810736
Label Danger Flying Material
Item 48 Part No.810736
13
CONTROLS
READ OWNERS MANUAL
BEFORE OPERATING
BEFORE STARTING, MAKE SURE:
USE PERSONAL
PROTECTION EQUIPMENT
HEIGHT ADJUST LEVER IS IN DOWN POSITION.
ALL GUARDS ARE ATTACHED.
USE ONLY A QUALIFIED MECHANIC T O SERVICE THIS MACHINE.
INSPECT MACHINE BEFORE EACH USE AND REPLACE ANY
WORN AND DAMAGED PARTS.
CHECK ENGINE OIL DAILY
.
PROPERLY SECURE EQUIPMENT BEFORE TRANSPORTING.
DISCONNECT SPARK PLUG WIRE BEFORE SERVICING UNIT.
FOR PREVENTATIVE MAINTENANCE
INSPECT AND CLEAN ENGINE AIR FILTER
DAILY. REPLACE AS NEEDED.
GREASE REEL BEARINGS AND LUBRICATE DEPTH
CONTROL LEVER EVERY ENGINE OIL CHANGE.
ALWAYS:
ROTATE KNOB TO ADJUST BLADE DEPTH
BLADES UP
TRANSPORT POSITION
BLADES DOWN
OPERATING POSITION
PROTECT BYSTANDERS
FLYING DEBRIS
BLADES UP
BLADES DOWN
350224
LOOSEN JAM NUT
BEFORE ADJUSTING
BLADE DEPTH THEN
TIGHTEN BACK TO
LOCK IN PLACE
Label Instructions Height Adjust
Item 35 Part No. 350224
WARNING
900327
Label Danger Guard
Item 52 Part No.900327
'
'
'
..
Honda
PULL TO ENGAGE CLUTCH
RELEASE TO DISENGAGE CLUTCH
830503
Label Clutch Item 49
Part No.830503
HONDA ENGINE THROTTLE CONTROL
THROTTLE LEVER
FUEL VALVE
CHOKE LEVER
'
'
'
