background image

   

                      CR POWER RAKE Owner’s Manual

                            

Part No 350245 

 

Form No F030515D  

 

PACKING CHECKLIST 

 

NOTE

: Items in ( ) can be referenced in the Parts Illustration and Parts List on pages 10-11. 

Your Billy Goat Power Rake is shipped from the factory in one carton, completely assembled.

 

 

  

PUT OIL IN ENGINE BEFORE STARTING

 

 
 
 
 
 

 

 

 

 
 
 
 
 
 
 

 

 
 
     

    

 

 

   

 

 

 

 

 

 

 

 

 

 

    

 

 

 

 

    

 

 

 

 

 

 

 

  

             

 

 

 

 

 

 

 

 

 

 
 

 

ASSEMBLY 

 
 
 

 

READ 

all safety instructions before assembling unit. 

TAKE CAUTION

 

when removing the unit from the box the Handle Assembly is attached and folded over.

 

NOTE

: Items in ( ) can be referenced in the Parts Illustration and Parts list on pages 10-11. 

1. 

UNFOLD

 the upper handle (item 26) and slide handle lock loops (item 28) into place to secure the upper handle to the 

lower.   

2. 

CHECK

 engine oil level and fill to proper level with engine manufacturers recommended grade of oil.  Move height adjust 

lever to down position, to level engine during checking.  See engine manufacturer

’s instruction manual. 

3. 

CONNECT

 spark plug wire. 

Boxing Parts 

Checklist

 

      

 

 Honda GC 5.0 

    OHC 
 

 

 Literature Assy 

     P/N-350243 
 

 

PARTS BAG & LITERATURE ASSY  

 

Warranty card P/N- 

400972, Owner’s Manual P/N-350245, Declaration of Conformity P/N-350139, General Safety and 

Warnings manual P/N-100295, and Literature CR Accessories 350246.

 

28

28

26

Содержание CR550H














Отзывы: