manualshive.com logo in svg

Billy Goat 051522001, Руководство оператора, Страница: 6 / 13

Поделиться
Скачать
Billy Goat 051522001 Скачать руководство пользователя страница 6

                       QVSP Operator’s Manual

         

 

 

Part No 27831517 

 

 

 

 

6 

 

 

OPERATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VACUUM OPERATION 

WARNING: The maximum RPM’s on the unit’s engine are set. Altering them from the factory settings could 

potentially damage the unit and void warranty. 

VACUUM NOZZLE HEIGHT ADJUSTMENT: Adjust by turning the knob clockwise to increase height and counter-clockwise to 

lower it. Adjust nozzle height according to surface conditions and debris size. For vacuuming on flat surfaces, set

 

nozzle 1/2" 

(12.7 mm) to 5/8" (15.8 mm) above ground. Adjust higher for uneven terrain and turf. 

  

FOR MAXIMUM PICKUP: Adjust nozzle close to debris, but without blocking airflow into the nozzle. 

NOTE

: Never bury nozzle 

into debris.

 

 

CLEARING A CLOGGED NOZZLE & EXHAUST:

 Turn engine off and wait for impeller to stop completely and 

disconnect spark plug wire. Wearing durable gloves, remove clog.  

DANGER

, the clog may contain sharp materials. Reconnect spark plug wire. 

PROPULSION 

First set the forward or reverse lever to the desired position. (Having the lever straight up will put the unit into neutral). To drive 

in a straight path squeeze both levers, for turning right squeeze the right lever only and likewise to turn left, squeeze the left 

lever. When no levers are engaged the unit will freewheel. 

DO NOT

 partially engage the transmission when engaging the levers. 

The levers must be completely engaged. Prolonged use of partial engagement could cause internal damage to transmission.

 

DEBRIS BAG                                           

Debris bags are normal replaceable wear items.    

NOTE:  

Frequently empty debris to prevent bag overloading with more weight than you can lift. Use the dust skirt when 

debris will be vacuumed in dusty conditions. 

 

DO NOT place bag on or near hot surface

, such as engine. Run engine at 1/2 throttle for first 1/2 hour to condition new bag. 

Your new bag requires a break-in period to condition the pores of the material against premature blockage. The entire bag 

surface serves as a filter, and must be able to breathe to have good vacuum performance. Be sure engine has come to a 

complete stop before removing or emptying bag. 

 

HOOD FILTER 

Hood filters are normal replaceable wear items. The hood filter is for use in dry dusty conditions only. DO NOT get the filter wet. 

Clean with light compressed air only.  

 

DUST SOCK 

Dust socks are normal replaceable wear items.

 

See dust sock care next page. 

 

DUSTY CONDITIONS 

This vacuum is designed for picking up trash, organic material and other similar debris.  However, many vacuums are used 

where dust is mixed with trash. Your unit can intermittently vacuum in dusty areas. Dust is the greatest cause of lost vacuum 

performance. However, following these rules will help maintain your machine's ability to vacuum in dusty conditions: 

•

  Run machine at idle to quarter throttle. 

•

  The debris bag must be cleaned more frequently. A vacuum with a clean, pillow soft bag will have good pickup 

performance. One with a dirty, tight bag will have poor pickup performance. If dirty, empty debris and vigorously shake 

bag free of dust. Having one or more spare debris bags is a good way to reduce down time while dirty bags are being 

cleaned.

 

DO NOT

 leave debris in bag while in storage. 

 

NOT 

FOR 

REPRODUCTION

Содержание 051522001














Отзывы:

Нет отзывов