Copyright © 2017 Call Flow Solutions Ltd. All Rights Reserved.
3.
The blue lead then connects into the IDU’s (Black box labelled Alvarion) Ethernet port
(On the side).
The black lead in the end goes off to the aerial and must be in
the ‘Radio’ port in the end of the IDU.
When fully functional you will have 2 lights on the IDU as
highlighted in the image.
4.
If you wish to connect a device hardwired, you will need to use the Yellow Ethernet
Lead provided with the router and connect it to one of the 4 Yellow ETH ports
available.
5.
Remove red covers and screw on aerials.
Please Note:
1) The blue Ethernet port labelled EWAN must only be used for the connection to
the IDU.
2) It is recommended that for your main computer you use the main Ethernet
port which is labelled ETH1.
