3
QUICK INSTALL GUIDE
Billion 7300N Draft 2 ADSL2+ Wireless Modem/Router Installation
1.1 Starting out:
Before you can establish an Internet connection through your Billion 7300N Modem/Router
make sure you have the following:
1.
A Computer or Notebook with an installed Network Adaptor (sometimes called an
Ethernet Adaptor, Network Card or NIC)
2.
An ADSL or DSL service account and configuration information provided by your
Internet Service Provider (ISP), or an existing cable modem. You should need only a
User Name
and
Password
, but you can check with your ISP to see if you require any
of the other following configuration parameters to connect your Billion 7300N
Modem/Router to the Internet :
a.
ISP User Name and Password
b.
VPI/VCI parameters
c.
Multiplexing Method
d.
Host and Domain Names
e.
ISP Domain Name Server ( DNS ) Address
f.
Fixed or Static IP Address.
1.2 Steps for Connection:
The following are the steps to properly connect your Billion 7300N Modem/Router.
N.B. For
configuration as a broadband router go to steps 4 and 5 and then jump to section 2.1.
1.
Turn off your computer.
2.
If you do not have an ADSL faceplate installed by your service provider, you must ensure
ADSL splitters (also called microfilters or filters) are fitted to
all
telephone sockets in use.
3.
Connect the supplied ADSL (RJ-11) cable from the splitter/filter of your chosen telephone
socket (or ADSL faceplate if you have one) to the
DSL
Port of your Billion 7300N
Modem/Router.
4.
Connect the yellow Ethernet cable (RJ-45) from one of the Ethernet ports of your Billion
7300N Modem/Router to the Network Adaptor in your computer.
5.
Connect the Power adaptor to the Billion 7300N Modem/Router and plug the other end
into a Power outlet. Power up the unit.
6.
Turn on your computer. Please allow up to 45 seconds for your Network Adaptor to locate
the Router. Please wait for the DSL light on the front of the router to turn to solid – this
may take up to 1-2 mins (see
3.1
Troubleshooting the connection).
