BILLION BIPAC-7000 ADSL USB Modem
18
PPP
If your encapsulation is set to be PPPoE or PPPoA, the following fields must be entered.
Service Name:
This item is for identification purpose. If it is required, your ISP will
provide you the information. Maximum input is
31
alphanumeric characters.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Authentication:
Default at “Auto”.
Automatic Reconnect:
Check to enable this device to automatically re-establish the
PPPoE session when disconnected by ISP.
PPP connect on WAN access:
Check to enable this device to automatically re-
establish the PPPoE session whenever there is WAN access traffic, e.g. Internet
access.
DHCP
DHCP client enable:
Check to enable the DHCP client function if you want the device
to get an IP address automatically from your ISP.
Host Name:
Enter the name of your work group.
All settings need to be saved and the device needs to be rebooted
before the changes to take effect.
