Billion BiPAC 4700AZ, Руководство пользователя

Страница: 82 / 189

78

Load Balance
WAN Port Service Detection Policy
WAN1: Select 4G/LTE or EWAN for WAN1.
WAN2: Select the EWAN if you select 4G/LTE as WAN1.
Service Detection: Select if to keep detecte WAN interface connected. If enable the setting, the traffic
will be automatically through another WAN if the WAN interface is disconnected.
Connectivity Decision: Set how many times of probing failure to disable load balance.
Connectivity Decision & Probe Cycle: Set a number of times and time in seconds to determine
when to turn-off the Load Balancing service.
Example,
Disable Load Balance after straight 3 consecutive failures in every 30 seconds meaning all
traffic will hand over to backup link (WAN2) after primary link fails to response in total of 90 seconds,
30 seconds for 3 consecutive failures.
Probe WAN1/WAN2:
Enable Ping to the gateway or an IP address

Gateway: Internal system will wait for responses to the pings from the gateway of the WAN.

Host: Internal system will wait for responses to the pings from a fixed IP address.