Billion BiPAC 2070(P) Homeplug AV 200 Ethernet Bridge
Product Application
BiPAC 2070P
BiPAC 2070
Hardware Installation
1. Power
Connection
Plug the supplied AC power cable to the wall jack and the other side to the device.
Please note that the plug type may differ according to different countries.
2. LAN Connection
Connect the supplied RJ-45 Ethernet cable to the Ethernet port on 2070P and the
other side to the device’s Ethernet interface.
Quick Start Guide
3. Power Connection
Connect the supplied DC-DC power cable to the 2070P’s power port and the other
side to the DC jack on the device. (for BiPAC 2070P only)
Setup Utility
After you complete the hardware installation, insert the CD-ROM to the CD-ROM drive to
perform Setup Utility for network configuration. The Setup Utility will auto-run. Follow the
step-by-step configuration wizard, the utility will guide you complete the basic network
configuration.
Product Support and Contact Information
Most problems can be solved by referring to the
Troubleshooting
section in the User’s Manual
.
If you cannot resolve the problem with the
Troubleshooting
chapter, please contact the dealer
where you purchased this product.
Contact Billion
WORLDWIDE
http://www.billion.com
