Billion BEC MX-1000 Скачать руководство пользователя страница 4

Страница: 4 / 158

Chapter 1: Introduction

Introduction to your Router

Embedded Dual 4G LTE Industrial Router

MX-1000, Embedded Dual 4G LTE Industrial Router, is integrated with the 802.11n Wireless Access

Point and Dual WAN interfaces featuring reliable connectivity and network expandability. This

cutting-edge networking device provides multi-GNSS engine for GPS, GLONASS, Galileo and QZSS

system for remotely tracking and monitoring vehicles. M1000 is uniquely installed dual 4G LTE

modules enabling an extensive range of mission-critical markets to enjoy a robust, always-on Internet

experience by plugging dual SIMs. Fallback and Failover between dual 4G LTE connections supports

a seamless wireless connection and is perfectly suitable for industrial M2M applications, ranging from

fleet management, public safety, smart bus & transportation, automotive, agriculture, construction,

and retail services.

Extraordinary Connectivity with Solid Data Protection

The MX-1000 features a rugged, compact design with integrated dual 4G LTE WAN ports, 4-port

Gigabit Ethernet switch, 802.11n Wi-Fi access point with multiple SSID supports, and two

multi-function USB 2.0 host interfaces for Storage/NAS. SPI firewall, and advanced VPN integration

provide security needed to enhance the operations of Public Safety, Energy Wellhead and Gas

Industry, Industrial M2M Segment, PoS/Kiosks/ATM, Fleet Management, and Smart

Transportation/Bus.

Vehicle Tracking System

MX-1000 is embedded with a GNSS receiver for GPS or GLONASS. To co-work with On-Board

Diagnostics(OBD) system, it eases the central control of geographically-dispersed fleets by presenting

individual vehicles' detailed information, including remaining fuel levels, rapid accelerations, and

locations.

Robust Design to Withstand in the Harshest Environments

The industrial-grade enclosure is designed to resist heat, dust, moisture and provides long-term

operation in the toughest of environments. M1000 supports an extended temperatures range from -40

to 140º F ( -40 to 60º C) for extremely challenging conditions such as industrial automation, mining

plants, wellhead & gas drilling, manufacturing factories, and virtually anywhere that requires a robust

wireless connection.

The Future of Internet Connectivity - 4G LTE

To offer an advanced network solution that meets the growing demands of M2M services, MX-1000

exclusively features dual WAN - load balance or auto-failover/failback to provide extraordinary,

always-on internet connectivity. In addition to the deployment of dual 4G LTE modules and dual SIMs,

MX-1000 broadens wireless coverage to rough terrains and rural areas and persists seamless

connectivity without interruptions.

Содержание BEC MX-1000































































































































































Результаты поиска

Содержание BEC MX-1000

Отзывы:

Похожие инструкции для BEC MX-1000

Бренды по названию

Популярные бренды

Billion BEC MX-1000, Руководство пользователя

Результаты поиска

Содержание BEC MX-1000

Отзывы:

Похожие инструкции для BEC MX-1000

Бренды по названию

Популярные бренды