
Chapter 2
Using BIPAC-2AB 2.0
Before Connecting
Make sure that you have all you need to connect the BIPAC-2AB 2.0 ISDN a/b
adaptor. You should have the following:
1.
At least one analog telephone (or other analog device)
2.
A power outlet that supplies 220 ~ 240 volts AC
3.
An ISDN basic rate S
0
interface released by PTT (Post, Telephone
and Telegraph administration)
Connecting the BIPAC-2AB 2.0
Please refer to the following instructions and figures for installation procedures:
1.
Connect one or two analog telephones (or other analog devices) to the
RJ-11 jacks labeled “a/b 1” or “a/b 2” on the back of the BIPAC-2AB
2.0. Refer to
Figure 2
.
2.
Connect your ISDN line to the RJ-45 jack labeled “ISDN S
0
” on the
back of the BIPAC-2AB 2.0. Refer to
Figure 2
.
3.
Plug the power adaptor into the power outlet. The POWER LED will
illuminate on the front panel.
Содержание 2AB
Страница 1: ...BIPAC 2AB 2 0 ISDN a b Adaptor User s Manual ...
Страница 4: ......