MINI WASH 18
MINI WASH 18
10
DMX 12 Channel Control setting
MINI WASH 18
MINI WASH 18
7
5- Service Modes
After major configuration changes it may be necessary to reboot
or reset the unit.
Resetting the Unit
To
select,use
the
“MODE/ESC”
button
and
choose
“rEST”(restore). Press “ENTER” to confirm. The unit powers
itself down and then on again for a few seconds. During this
time the LED display will scroll””rEST” from left to right,after
which normal operation recommences.
Restoring factory defaults
To select,use the “MODE/ESC” button and choose”LoAD”(load).
Press “ENTER” to confirm. The LED display will change
to”d001” to confirm a factory reset has been completed.
Powering the unit initially
During the warm up the unit will auto test itself for a few seconds.
During this time the led display will scroll”rEST” from left to right.
The unit then commences operation normally.
6- DMX Modes
The unit supports 5 and 12 channel DMX Sub-modes frim a
standard desk. When a suitable DMX connection is
made,the”decimal piont” in “d.001” will flash.
Setting DMX Addresses
Use the “MODE/ESC” button to display”d001”, “UP”and