Bilanciai DD1050, Руководство по эксплуатации, техническому обслуживанию и установке

Страница: 32 / 112

32
DD1050
5.1.3 Weight indication (on the left-hand side of the weight value)
Stable weight symbol
Indicates that the displayed weight is stable and can be printed and/or transmitted.
"Center zero" symbol
Indicates that the weight detected by the platform is near zero, between -1/4 + +1/4 of the
division.
Tare symbol
Indicates that there is a tare symbol memorized by acquisition.
Tare symbol entered via the keyboard
Indicates that the tare value acquired has been entered via the keyboard.
Gross weight symbol
Net weight symbol
When this symbol is on it means that a tare has been memorized via acquisition.
If the
PT
indication is also on at the same time, it means that a tare has been entered via the
keyboard.
Indication of the weighing range for multiextension instruments (ME)
5.1.4 Weight indication (on the right-hand side of the weight value)
Scale A
Key for selecting scale “A”.
Scale B
Key for selecting scale “B”.
Scale C
Key for selecting scale “C”.
Scale D
Key for selecting scale “D”.
Scale error
Means that the scale is in the error status (Click on the - SCALE TEST key); (see paragraph 5.2 on
page 34).
Scale operating
Indicates that the scale is operating (Click on the - SCALE TEST key); (see paragraph 5.2 on page 34).