SERVICE
10
Replacing the Lift Rollers
1. On a paved, level surface, pull trailer onto 4x4
blocks. Jack up and unhitch the trailer.
2. Lower the deck until the front or rear lift rollers
can be removed from the roller access holes.
3-1/2
Max.
Max.
Cap.
Cap.
1500
The deck must be supported by the paved surface
or shoring before the lift rollers are removed.
3. Use a hex wrench to unscrew and remove the
rollers. Install and tighten new rollers.
NOTE:
It is easier to remove and replace one roller
at a time. You can adjust the jack to access each
roller. Loosen set screw first.