G. CONTROLS and THEIR FUNCTIONS;
GROUND CONTROL STATION;
continued …
18 - 19. BOOM ROTATION BUTTONS;
Pressing
and holding a desired
SPEED
button and the
BOOM ROTATIONCLOCKWISE
or
COUNTERCLOCKWISE
button at the same
time enables the boom to rotate in the direction
selected. The boom will rotate through 700
degrees until the buttons are released or
the stop is reached.
20 - 24. OUTRIGGER CONTROLS;
(Figure; 3-3)
For automatic outrigger extension / retraction;
Select
EXTEND
or
RETRACT
outrigger button
and the
AUTO LEVEL
button at the same time.
To manually extend or retract the outriggers:
Select
EXTEND
or
RETRACT
outrigger button
and one of the
OUTRIGGER
buttons at the
same time. The outrigger indicator
LED
s light
up when the outriggers are properly deployed
and the boom weight is on the outriggers. Each of the outer outrigger
LED
s indicates load is on the
outrigger footpad. Each of the inner outrigger
LED
light up and a buzzer sounds when the boom is level.
G. CONTROLS and THEIR FUNCTIONS;
PLATFORM CONTROL STATION;
(see the Manufacturer’s “Operator’s Manual”, pages; 16-17).
The “Platform Control Station” is used
to control boom motion. To access the
Platform Control Station, turn the key
(Figure; 3-2) Platform Control Station
switch at the ground control station to
the platform control setting and enter
the work cage.
1 - 2.
ENGINE START and CHOKE;
Not
applicable on this model.
3. HORN BUTTON;
Pressing the button
will sound the horn. Use
HORN
button
to warn personnel in the area of a
falling object hazard, impending boom
motion or the need for assistance.
4. BATTERY CONDITION INDICATOR;
Indicator
LED
s light up to indicate the
level of charge remaining in the
batteries… green - good charge level,
yellow - need for charge and red -
charge level is low; boom operations
should be halted until batteries are
recharged.
5. EMERGENCY STOP BUTTON;
When
pushed in, the emergency
STOP
button
disconnects electrical power to the
“Ground” and “Platform” control stations.
The emergency
STOP
pushbutton should
only be pressed to immediately stop all
boom motions. To resume control, pull
out the emergency
STOP
button.
6. SPEED BUTTONS;
The
SPEED
buttons
along the lower right side of the control
panel must be pressed and held while
selecting boom functions. Four speeds are available to control positioning of the boom lift.
7 - 8. BOOM EXTEND/RETRACT BUTTONS;
Pressing and holding a desired
SPEED
button and the
BOOM EXTEND
button at the same time extends the telescopic boom. Pressing and holding a desired
SPEED
button and the
BOOM RETRACT
button at the same time retract the boom. Boom motion continues until the buttons are
released or until the boom reaches a hard stop or a safe travel limit.
9 - 14. BOOM RAISE/DOWN BUTTONS;
Pressing and holding a desired
SPEED
button and the
UPPER/LOWER / JIB
BOOM RAISE
button at the same time will raise the chosen boom. Pressing a desired
SPEED
button and the
UPPER/LOWER / JIB BOOM DOWN
button at the same time will lower the chosen boom. Boom motion continues
until the buttons are released or until the boom reaches a hard stop or a safe travel limit.
15. SPEED BUTTONS;
The
SPEED
buttons along the lower right side of the control panel must be pressed and
held while selecting a boom function. Four speeds are available to control positioning of the boom lift.
2015 - BIL-JAX #4725A,
“TOWABLE - ARTICULATE BOOM LIFT” - OPERATIONAL & SAFETY INFO
…
page 6 - 12
Содержание 4527A
Страница 12: ......
