•
To enter the settings menu press and hold the
MENU
and
POWER
buttons at the
same time. This can only be entered with the display powered off.
•
To exit this interface press and hold either the
MENU
or
POWER
button. This
interface will also be automatically exited if nothing is pressed for 1 minute.
Changing Parameters in the Settings Menu
•
Press the
POWER
button to scroll through P settings
•
Press the
MENU
button when on the P setting you wish to change select it for
editing
•
Press the
POWER
button to change the P Setting value
•
Hold the
POWER
button to save the P Setting Value after changing it
•
Hold the
MENU
button to exit the settings menu after making any changes.
Settings Menu
•
P01: Bike Running Voltage
DO NOT CHANGE
•
P02: Wheel Size
– this is set correctly for the bike from the Biktrix
•
P03: Max Speed
– changes the max speed the bike will go before the motor cuts
out.
ERROR CODES
Your display may show an error code if the electronics of the bike are experiencing
problems. Here are the error codes and what they mean. Contact Support if you need
assistance with resolving these or if the provided troubleshooting does not resolve the
issue.
Error Code
Definition
Troubleshooting
E021
Current Abnormality
Contact Support
E022
Throttle Abnormality
Unplug and reinstall throttle plug
E023
Motor Phase Abnormality
Contact Support
E024
Motor Hall Signal Abnormality Contact Support
E025
Brake Abnormality
Unplug brake sensors
E030
Communication Abnormality
Unplug and reinstall display plug
