MPeV5 - display screens:
Hereinafter, the following abbreviations will be used:
TBSP - Top Button, Short Pressed
TBPH - Top Button Pressed and Hold
LBSP - Lower Button, Short Pressed
LBPH - Lower Button Pressed and Hold
On each screen (except the configuration screen):
TBSP - change to the next screen
LBSP - changing the screen to the previous one
SCREEN 1:
•
speed
•
battery level
•
assist level
•
the distance to go, on the remaining battery (RANGE)
•
brake and cruise control use indicator (*)
•
TBPH - assist mode is changed to a higher one. When active cruise control - increasing the speed.
•
LBPH - assist mode is changed to a lower one. When active cruise control - decreasing the speed.
SCREEN 2:
•
MX
: Maximum registered speed, during the daily distance [km / h or mph]
•
TR
: Daily distance (trip) [km or mi]
•
AV
: Average speed during the daily distance [km / h or mph]
•
MT
: number of minutes in motion during the daily distance [min]
•
TBPH - no action
•
LBPH - zeroing all values of screen 1 and PM value from screen 3 and IM and WK values from screen 4
SCREEN 3:
•
U
: Battery voltage [V]
•
I:
Current drawn from the battery [A]
•
Q
: instant battery power [W]
•
PM
: Maximum registered power drawn from the battery during the daily distance [W]
•
TBPH - no action
•
LBPH - calibration / zeroing of the current sensor (I) (use only when connecting the MPe computer for the first time or when at standstill, the value (I)
does not indicate 0)
SCREEN 4:
•
IM
: Maximum recorded value of current consumed during the daily distance [A]
•
WK
: Average amount of Wh (watt-hours) consumed, per one kilometer of daily distance traveled [Wh / km]
•
BC
: Battery capacity (entered in parameter no 2 in the configuration screen) [Ah]
•
AU
: number of Ah consumed (ampere-hours) from the battery, since the last charge [Ah]
•
TBPH - no action
•
LBPH - resetting the AU value, which results in resetting the battery charge indicator from screen 1 to full (also after fully charging the battery, this
operation is done automatically)
