E-BIKE RECHARGING STATION BC1
Quick Start
How to recharge
1.
Plug the charging cable into the battery charge connector.
2.
Remove the cable’s magnetic cap and make sure the control display shows
the
“Insert cable”
message
.
3.
Insert the magnetic cable connector into the recharging station plug.
NOTE: for a correct plug, make sure that the magnetic connector is accurately
aligned to the recharging station socket.
4.
During recharging, the display shows the total charging time.
A self-test is automatically performed by the station before every recharge.
To interrupt a recharging operation simply unplug the cable from the
recharging station.
5.
The recharging is automatically stopped once the plugged battery is
completely full.
WARNING
If during a recharging operation the
“Cable error” with 0x7FFF errorcode appears,
a possible short circuit has been detected.
Please immediately unplug the cable
from the recharging station and from the e-bike battery.
Troubleshooting
Copyright © 2020, Bikef. Rev.09.2020
2-5
