36
8
Sawtooth appears when printing a
straight line pattern
The viscosities of the tables are
not enough, and the fabrics and
guide tapes slip. Please deal
with
them
according
to
the
specific situation. RIP capacity
is large, so use the mode of
printing while doing RIP when
output. It is recommended that
documents with large capacity be
printed after finishing the RIP
9
When printing, the printing speed
is slow or not.
USB interface does not insert, or too many
desktop files, please properly back up the
files and remove them from the computer
hard disk.
10
Patterns
of
knitted
fabrics
deformed after printing
After
finishing
the
pretreatment, a knitted fabric is
selected for shrinkage detection
(the shrinkage of general knitted
fabric is different in warp and
weft directions). The pattern is
deformed
according
to
the
shrinkage and then printed.
