Shenzhen Bigtree techonlogy Co.,LTD
BIG TREE TECH
6.After firmware debugging, compile and flash on the
motherboard, open the software Pronterface in computer,
connect to the motherboard to view the TMC5161 driver
running status of each SPI mode.
IV. Notes
1. Pay attention to the line sequence and I/O port when
connecting, the wrong line will directly make the driver can
not work, please carefully connectthe driver according to the
pin diagram;
2. When inserting the drive into the motherboard, pay
attention to the driving direction, can not be plugged in
reverse, to prevent the drive from burning down;
3. Before driving work, we must make sure that heat
dissipation can work to prevent driving abnormal work;
4. Before installing the drive, make sure the power supply was
disconnected to prevent the drive from burning down;
5. Do not plug and pull the module to avoid damage;
6. When installing the heat sink, please pay attention to the
gap
between the heat sink and pins to prevent
short-circuited phenomenon.
