Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
Notes
1) Ensure that all wires, jumper and drivers are correctly plugged in before power-on.
2) To avoid damage, do not plug or unplug the stepper drivers when the board is
powered.
3) Double check all your connections before powering up the board.
4) At the moment printing from a USB flash drive is not supported.
5) SKR E3 DIP V1.0 is a motherboard designed specifically for the Ender 3 printer. If you
want to use another machine, please refer to the corresponding electrical parameters
of Ender3 (such as heated bed power, extruder cartridge power, etc.). The electrical
parameters of other machines should never exceed the electrical parameters of the
Ender 3. Our company will not compensate for any losses caused.
10
