Hook
1
6mm
6mm
Rib template (3mm ply)
1
B
A"
B"
A
A = A"
B = B"
1.5mm
30mm
Main joiner hole
Hook screw
Wood dowel (6x50mm)
2
2
4
Rubber band
Assembly of main wing.
Epoxy the wood dowels in the holes and set the
hook screws to appropriate position
Fetching out the servo line and air pipe.
According the rib template drill two holes in the fuselage.
Assemble the wing to fuselage and draw out the rubber
band with hook from fuselage as below.
Fasten another wing with the rubber band.
17
18
19
20
16
4
21
Wooden Block
2mm
Wooden Block(20x15x15mm)
2
2
2
Wooden Block(20x10x15mm)
Hatch release pin
2
2
Wooden Block(20x10x15mm)
Wooden Block(20x15x15mm)
20mm
20mm
140mm
140mm
2
Hatch release pin
Mount hatch cover to fuselage.
Epoxy wooden block and thinmbles
inside hatch cover.
Epoxy wooden block to appropriate position inside
fuselage and drill a hole in each of them.
Epoxy the strut cover around the wing strut in the
fuselage and take care to keep the fuselage clean.
Epoxy the strut cover around the wing strut in the
fuselage and take care to keep the wing clean.
66
67
68
69
70
13
Accessory list for the coning installation steps.
