Step 1:
Locate the Mounting Location
Attach the Quick Release plates to the side framing at the back of the machine. (2) 3/8”
holes will need to be drilled into the machine in order to properly mount the plates. The
two marked red dots below will be your mounting hole locations.
(Location
Schematics on next page)
Tools Required:
For this installation you will need the following tools.
CheckMate™ Hardware
Drill
(*Depends on
mower.)
3/8” Drill Bit
(*Depends
on mower.)
1/8” wrench
or socket
and
3/4” wrench
or socket
