Step 5: Install Striping Kit
Remove preinstalled 1/2” x 1” bolts and lock washers from gray channel. Re-insert the bolt
[with split lock washer] through the L shaped bracket and thread into the channel nut inside
channel.
(Before tightening bolts all the way down; center roller behind the mower)
After centering the roller; use a 3/4” wrench to firmly tighten each mounting arm to the striping
roller.
Final Steps
Check installation, pick up the roller to confirm it freely pivots up and down. Also reinstall
bagger to mower if desired. (Example photo below for reference only. Pictured mower uses a
different mounting setup)
Installation is now complete! Enjoy striping with your new CheckMate ™ Striping kit!
If you have any questions or concerns, feel free to reach out to us!
Phone: (800) 411-0150 Email: [email protected]
US Patent 6,962,039 B2, US Patent 6,993,894 B2