Bigham Lilliston Rolling Cultivator Generation 3, Руководство оператора

Страница: 15 / 52

Page 15
Form # B15-790
®
®
®
• Be certain all moving parts on attachments have come to a complete stop before attempting to
perform maintenance.
• Always use a safety support and block the wheels. Never use a jack to support the equipment.
• Always use the proper tools or equipment for the job at hand.
• Use extreme caution when making adjustments.
• Never replace hex bolts with less than grade five bolts unless otherwise specified.
• After servicing, be sure all tools, parts and service equipment are removed.
• Where replacement parts are necessary for periodic maintenance and servicing, genuine factory
replacement parts must be used to restore your equipment to original specifications. The
manufacturer will not claim responsibility for use of unapproved parts and/or accessories
and other damages as a result of their use.
• If equipment has been altered in any way from original design, the manufacturer does not accept
any liability for injury or warranty.
• If repairs require the use of a torch or electric welder, be sure that all flammable and combustible
materials are removed.
• Do not weld or cut on any tank containing oil, fuel or their fumes or other flammable material, or
any container whose previous contents are unknown.
• Cleaning solvents should be used with care. Petroleum based solvents are flammable and present
a fire hazard. Don’t use gasoline. All solvents must be used with adequate ventilation and
their vapors should not be inhaled.
Hydraulic Fluid and Equipment Safety
Only adequately trained and qualified persons should work on hydraulics systems. You may be
severely injured or killed by being crushed under a falling piece of equipment. Always have transport locks
in place and frame sufficiently blocked when working on any implement.
Hydraulic fluid escaping under pressure can have sufficient force to cause injury. Keep all hoses and
connections in good serviceable condition. Failure to heed may result in serious personal injury or death.
Escaping hydraulic fluid under pressure can have sufficient pressure to penetrate the skin causing serious
injury. Avoid the hazard by relieving the pressure before disconnecting lines or performing work on the
system.
Make sure hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition
before applying pressure to the system. Use a piece of paper or cardboard, NOT BODY PARTS, to check