12
TROUBLESHOOTING
PROBLEM 1:
No power is coming out . Solution: check the fuse to make sure it is good.
PROBLEM 2:
No power is being generated - the built in power meter is not lighting up. Solution: WHen this happens it
may be that the tire is not touching the silver roller. Turn the bigfoot knob under the platform such that it raises
upward and presses against the metal roller with the rear tire. .
PROBLEM 3: Very lower power is being generated on the power station
This can happen when you have the Bigfoot bike generator in low Voltage mode. Make sure the Voltage is
getting up above 60V when you pedal by looking at the power meter built into the bigfoot system.
Sales & Support
Email:
Website: Pedalpowergenerator.com
Bradley Whaley - Electrical / Mechanical Engineer
mobile: USA 480-489-4111 web:
https://PedalPowerGenerator.com
Based in Phoenix Arizona, USA
BDW Enterprises LLC
1293 E. Parkview Dr.
Gilbert, AZ 85295
PPG-R500-BD-PDB Dual DC Generator System OWNER'S MANUAL Revision 1.0 © 2017
Http:PedalPowerGenerator.com
