One set of 6 Bay Connectors joins 2 bays side
by side or back to back for added stability
Bay Connectors
ACCESSORIES ALSO AVAILABLE
HOW TO FIT BAY CONNECTORS
1
2
3
4
5
6
Bays connected
side by side
1
2
Code BC19
2
Note: Illustrations not to scale
G
Assembly - 3x Value Shelving Bays
1
4
5
Bend the centre support ends
D
at
right angles. Slot into front and back
beams
B
.
Connect long front and back beams
B
to side frames. Ensure
front and back beams are positioned at same height as side
beams
C
.
3
Repeat steps 1-2 to create second side frame.
2
To create side frame, connect two half uprights
A
together using
short side beams
C
at the height required for the first two shelves.
Ensure studs on beam are fully engaged in keyholes.
6
Slot upright connectors
F
into top
of lower uprights
A
, locating 2 studs
into the upright and leaving one stud
exposed.
8
Repeat steps 2, 4 & 5 to add remaining levels and insert MDF
decks
E
.
6
1
2
F
67
The single inverted keyhole on the
remaining half uprights can now be
located onto the upright connectors
and pushed into place or tapped down
with a mallet if required.
A
G
Single
keyhole
1
2
3
4
Bend ends over with
screwdriver to hold
support in place
5
Bend to
180°
If assembling
as workbench
omit step 6 & 7
We recommend
fixing to a wall
for maximum
stability
UWFS1
Fully
engaged
A
C
C
A
C
C
C
A
A
B
A
C
Attach plastic feet
G
to bottom of two half uprights
A
, ensuring
that the single inverted keyhole is at the bottom of the uprights.
Push the foot onto the upright.
B
Single
keyhole
