Bigdog Mower Co. ALPHA MPX, Общее руководство по обслуживанию, Страница: 15 / 40

125277 4-3 REV A
8. To check, move the steering control lever to the
reverse position and release. The steering control lever
should return to the neutral position. If not, repeat
steps 1 through 7.
Control lever stops adjustment
The steering control lever stops may be adjusted to help
drive straight when the steering control levers are pushed
forward against the stops.
1. Raise the rear of the mower and block with certified
jack stands.
2. Chock the front tires.
3. Make sure both steering control levers are in the park
brake position. Figure 4-7
4. Raise the seat platform and disconnect the mower
harness from the seat switch. Bypass the seat switch
by connecting the two mower harness female spades
together. Figure 4-8
5. Start the engine and move both steering control levers
forward against the stops in the steering cover.
6. Determine if the drive wheels are rotating equally or if
one is faster than the other. If the wheels are not the
same speed, proceed to the next step.
A. Steering control levers
Figure 4-5
A. Rear ball stud B. Damper spring housing
Figure 4-6
A
A
A
B
Keep hands, hair, clothing, etc., clear of the rotating
drive wheels/hubs during this process. Exercise
extreme caution.
Steering control levers in park brake position
A. Steering control lever
Figure 4-7
Do not operate (drive) the mower without plugging
the mower’s wiring harness into the seat switch.
This switch is an important part of the safety start
interlock system. Serious injury can result if the seat
switch is not plugged into the mower’s wiring
harness.
WARNING
A
WARNING