15
An activation will need to be carried
out on any new or replacement
modem. To start the activation
you will need to go to the following
website after completing the above
install process.
http://welcome.skylogic.com
Once on this page click start activation
and this will check the quality of the
installation of the modem to make
sure that it is getting a good signal
from the satellite system.
Once the quality has been checked
it will show a status page of the
modem where it will display the
Users MAC Address of the modem,
the forward link SNR, Return Link
SNR, the IP address being obtained
by the modem and it will check to
see if the software is up to date.
If this information is displayed in
green, then its modem is ready to be
activated on the account.
MODEM
ACTIVATION
