- EN 5 -
10
Time button: When you turn on the light, the timer is disabled and the device will run
continuously without stopping.
• Pressing the Time button once activates the timer: the device will run in “Red” mode
for 30 minutes, then the light and Bluetooth function will switch off automatically. If you
press another color button, it will stay the color you selected and turn off automatically
within 30 minutes of the first time you pressed the Time button.
• Press the button twice to activate the timer: the device will run in “Green” mode for
1 hour, then the light and Bluetooth function will switch off automatically. If you press
another color button, it will stay the color you selected and turn off automatically within
1 hour of the first time you pressed the Time button.
•
Press the button 3 times to activate the timer: the device will run in “Blue” mode for 90
minutes, then the light and Bluetooth function will switch off automatically. If you press
another color button, it will stay the color you selected and turn off automatically within
90 minutes of the first time you pressed the Time button.
• Press the button 4 times to activate the timer: the device will run in “Yellow” mode for
2 hours, then the light and Bluetooth function will switch off automatically. If you press
another color button, it will stay the color you selected and turn off automatically within
2 hours of the first time you pressed the Time button.
• Press the button 5 times to activate the timer: the device will run in “Cyan” (Green/
Blue) mode for 150 minutes, then the light and Bluetooth function will switch off
automatically. If you press another color button, it will stay the color you selected and
turn off automatically within 150 minutes of the first time you pressed the Time button.
• Press the button 6 times to activate the timer: the device will run in “Purple” mode for
3 hours, then the light and Bluetooth function will switch off automatically. If you press
another color button, it will stay the color you selected and turn off automatically within
3 hours of the first time you pressed the Time button.
• Press the button 7 times and the timer function will go back “Red” mode again, then go
through the other colors in turn.
11
Previous button: Once the Bluetooth and music functions are enabled, press this button
to select the previous track.
12
Next button: Once the Bluetooth and music functions are enabled, press this button to
select the next track.
13
Pause and Play: Once the Bluetooth and music functions are enabled, press this button
to listen to a track or to pause it. (Notice: this only works for the master: one long-press of
this button will disconnect the Bluetooth between your Bluetooth device and 2 speakers,
but can still be connected to another new Bluetooth device. If you need to re-connect with
your own Bluetooth device, you need to repair and connect via your device)
14
Volume “+” and “-”: Once the Bluetooth and music functions are enabled, press “+” to turn
the volume up or “-” to turn it down.
Battery replacement (for remote control)
• If the remote control fails to activate the light, replace the battery.
• Move the slot besides the battery cover to the right side and the battery cover will pop out. Then take
the battery out and replace it with a new one.
• Pay attention to the polarity of the battery on the cover and the cover direction when installing them
back in the remote control.
Warning!
• Make sure that battery is inserted the right way and with the right polarity
• Remove exhausted battery from the product
• The supply terminals should not be short-circuited
• Dispose of battery safely
