BIGASUO F-1080P, Руководство пользователя

Страница: 32 / 33

30
Remote controller does
not work
Solution Troubleshooting
Check the battery.
Make sure there is no obstacles stand in between your projector
and the remote controller.
Make sure the remote controller is not too far away from your
projector. The maximum operation range is 8m.
Make sure the remote controller and your projector are paired
with the same remote control codes.
Disable the key lock of the remote controller in the Setup menu.
Image distorted or
disappeared
Check and revise the PC Adj. menu or Screen menu.
A password prompt
displays after power on
You have set up the Logo PIN Code lock function
Light indicator turns on or
ashes Check status of your projector according to the light indicator
status.
"
X " mark displays Invalid operation, please operate your projector correctly.
Auto Setting does not
work
Make sure it is not set to "Off" in each setup menu.
Make sure "On" is not set in Ceiling function.
Control panel does not
function
Disable the key lock on control panel function in the Safety option
of the Setup menu.
Cannot remove the Logo
Select password, Key
Lock, and PIN Code lock
Please call your dealer or service center.
Make sure your projector is correctly connected to external equipment.
Make sure all devices have plugged in an AC power source and have been powered on.
If your projector fails to project image of the connected computer, restart the projector.
Your projector employs high voltage power for operation. Do not open its casing.
If the problem persists, call your dealer or service center. Along with model number
of your projector and a description to your problem. You will be advised on getting our
services.
Note
us-projector-1080@eitack.com