Bigab 14-17 Скачать руководство пользователя страница 22

Страница: 22 / 50

14-17

www.forsmw.com

2. INSTALLATION

2.1.

UNPACKING

Before unpacking, check visually that the trailer is not damaged during transportation. If the

trailer is damaged, inform about this to the company that transported the trailer and the
manufacturer of the product immediately.

•

Usage of the trailer is strictly forbidden if safety devices of the trailer are damaged. For
more detailed information about safety devices see 1.5

•

When you are unpacking the trailer be careful: do not damage sensitive components, do
not change factory settings or damage paint or other surface finishes.

•

Lift up the trailer from transportation frame.

•

Lower the trailer to the floor.

•

Be careful when lifting so that cables, connectors or other components are not damaged
for instance between lift work and trailer frame.

•

Weight depends see technical information for data.

2.2.

ADJUSTMENTS

Quick couplings are used in the operation of connecting the vehicle in use with the trailer.

These couplings serve to disconnect the hoses without their breakage and to prevent loss of oil
under accidental strain and pull.

2.3.

WITHDRAWAL FROM USE AND STORAGE

•

It is not allowed to store the trailer in a cold and/or damp environment for a long period.

•

All metal parts are recyclable and should when time comes be handed over to a recycler.

Содержание 14-17



















































Результаты поиска

Содержание 14-17

Отзывы:

Бренды по названию

Популярные бренды

Bigab 14-17, Руководство пользователя

Результаты поиска

Содержание 14-17

Отзывы:

Бренды по названию

Популярные бренды