Shenzhen BIGTREE technology co., LTD.
BIG TREE TECH
power off. The power on can be started after checking
the correct connection of the line and the correct
insertion of the drive, so as to prevent the wrong
connection of the mainboard and drive from being burnt
down and causing unnecessary losses；
BTT SKR MINI E3 V1.2 is a motherboard designed
specifically for the Ender 3 printer. If the user
wants to use another machine, please refer to the
corresponding electrical parameters of Ender3 (such
as hot bed power, heating rod power, etc.). The
electrical parameters of other machines should never
exceed the electrical parameters of Ender 3 machines.
Otherwise our company will not compensate for any
losses caused.
The E3 motherboard can support the LCD12864
screen with the interface CR10_STOCKDISPLAY.
If you encounter other problems while using, please
contact us, we will answer you scrupulous; if you have
any good comments or suggestions for our products, pls
feel free to inform us, we will carefully consider your
comments or suggestions, thank you for choosing
BIGTREETECH products, thank you!
