STEP 1
STEP 2
STEP 3
STEP 4
MODEL : NOBILITY-ST 4856
ASSEMBLY INSTRUCTIONS
PAGE: /4
2
1
3
4
5
3
4
1
3
4
5
1
2
3
4
5
- Insert hardware A1 onto panel (3), (4) and (5).
(Repeat 6 times.)
- Insert hardware A2 onto panel (1).
(Repeat 6 times.)
- Insert hardware B onto panel (3), (4) and (5).
(Repeat 12 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
PRESS
A1
x6
A2
x6
ROTATE
x12
PRESS
B
Fix hardware J1 (L/R) into panel (3) and (4) with hardware F.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
x2
ROTATE
x2
ROTATE
J1(L)
F
F
First hole from the edge. Small hole at the center.
J1(R)
- Attach panel (1) to panel (3), (4) and (5).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 6 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
ROTATE
Section View
x6
A2
A1
x6
PRESS
A3
Connect panel (2) to panel (3), (4) and (5)
by using hardware C and D.
(Repeat 6 times.)
ROTATE
x6
C
D
* In this step hardware B are pre-inserted.
HARDWARE
D
x2
ROTATE
F
Third hole from the edge.
