background image

2

  IMPORTANT

  OWNER / USER RESPONSIBILITY

  INTENDED USE

  TECHNICAL SPECIFICATIONS

DO NOT OPERATE OR REPAIR THIS PRODUCT WITHOUT READING THIS MANUAL.

Read and follow the safety instructions. Keep Instructions readily available for operators. Make certain all 

operators are properly trained and understand how to safely and correctly operate the product. By proceeding 

you agree that you fully understand and comprehend the full contents of this manual. Failure to operate this 

product as intended may cause injury or death. The manufacturer is not responsible for any damages or injury 

caused by improper use or neglect. Allow product operation only with all parts in place and operating safely. 

Use only genuine replacement parts. Service and maintain the product only with authorized or approved 

replacement parts; negligence will make the product unsafe for use and will void the warranty. Carefully 

inspect the product on a regular basis and perform all maintenance as required. Store these instructions 

in a protected dry location. Keep all decals on the product clean and visible. Do not modify and/or use for 

any application other than that for which this product was designed. If you have any questions relative to a 

particular application, DO NOT use the product until you have first contacted the distributor or manufacturer to 

determine if it can or should be performed on the product.

For technical questions please call 1-888-448-6746.

This heavy-duty jack has a single hydraulic pump piston that effortlessly raises the lift arm. Pump piston dust 

shields and wiper seals protect the hydraulic system from contaminants. The jack features an overload valve 

bypass system to prevent jack damage and user injury. Compact design allows use in confined spaces. Easily 

fits under low vehicles. Meets ASME PASE safety standards.

Item

Capacity

Lifting Range 

Min. (Inch)

Lifting Range 

Max. (Inch)

Lifting Range 

Min. (cm)

Lifting Range 

Max. (cm)

T83002

3 TON

5-1/2

20-1/2

14

52

Before You Begin Register This Product.

For future reference, record the model name, model number, date of manufacture and purchase date of this 

product. You can find this information on the product.

Model Name 

Model Number

Date of Manufacture

Date of Purchase

____________________________

____________________________

____________________________

____________________________

Содержание TORIN T83002


















Отзывы: