5. Take hold of the fishing line that you
have just let out and attach a line release
to it (A). (There are many styles of line
releases on the market to choose from.
We are showing the “Pinch Pad” style
here). Then, use the retrieval lanyard to
pull the planer board tow line within
reach. Clip the line release hanger clip
around the tow line and close the hanger
clip (B). Then, let out
the retrieval lanyard until the tow line
has returned to it’s normal position.
6. Remove your fishing rod from the rod
holder and let out more fishing line.
As you do this, the line release will
slide down the tow line. Stop the
first line just short of the Otter
Boat
®
. (This line should be run with
a shallow running lure). Now, set the
drag and drag clicker on your fishing
reel and place your fishing rod back in
the rod holder closest to the front of
the boat.
7. Now, take your second fishing rod from
the rod holder and repeat step 4. On this
fishing line, that is closer to the boat,
you may choose to vary the depth of
your lure presentation by using a
Mini-Diver or Deep’R Diver
®
disk
attached about 4 feet ahead of your
lure. Now repeat steps 5 and 6 and
place your fishing rod in the next rod
holder back from the back from the
first rod holder.
NOTE:
Each successive fishing line
added to the tow line should
be placed below the previous
fishing line to avoid tangling
with other lines when a fish
strikes and pulls the fishing line
from the line release.
Now, you are ready to repeat steps 4
through 7 on the other side of the boat.
Содержание Band Buster
Страница 1: ......