HOW TO
ASSEMBLE & OPERATE
BIG 60 I & II
770 West College Avenue
•
P. O. Box 5250
Pleasant Gap, PA 16823-5250
800-326-9575
814-359-2755
• Fax:
814-359-2621
E-mail:
www.BigJohnGrills.com
1. Remove all packaging from
your Big 60 Utility Stove.
2. Slide the finger grates securely
into the squares on the top of
the unit.
3. Place control knobs on
control valves.
1. All Big John products are designed FOR OUTDOOR USE ONLY.
2. Place the Utility Stove on a sturdy, level, non-combustible surface
that is capable of supporting the weight of the stove and accessories.
Or, securely attach the extension legs if you are using the stove as a
freestanding unit.
3. Securely connect regulator to the propane cylinder and check for
leaks according to the instructions in the Propane Safety section of
this manual.
1. All Big John products are designed FOR OUTDOOR USE ONLY.
2. Prior to lighting the utility stove, place all control knobs in the
CLOSED position, as marked on the control panel.
ASSEMBLY
SET-UP
OPERATION
5.
ALWAYS CHECK FOR LEAKS.
Apply soapy water with a brush at areas marked on diagram with
an
X
. Open main cylinder valve. If bubbles appear, and further
tightening of the connector does not eliminate the leak, close main
cylinder valve and call a qualified propane dealer. If system is free
of leaks, light burners and check for a clean blue flame.
6. If you suspect a problem, have your grill or tank serviced by
a qualified propane dealer.
PROPANE SAFETY
WWW
.B
IG
J
OHN
G
RILLS
.
COM
REPLACEMENT PARTS
302110
Low Pressure Regulator
302120
Low Pressure 6 ft. Hose
302401
Finger Grate - Press in, each (Square hole)
302402
Finger Grate - Slide-In with Set Screw, each
302406
Pipe Manifold for Big 60 I
302407
Pipe Manifold for Big 60 II
302410
Control Valve - Please specify orifice
302415
Control Knob
302411
Orifice - Please specify size
302425
3 Ring, 60,000 Btu burner
302424
Stainless Steel Air Mixer
301016
30 lb. LP Cylinder
301017
40 lb. LP Cylinder
