
ATTENTION!!
WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
6
Top Leg
Top Leg
Top Leg
Step 7
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Step 6
Step 5
Step 4
Step 3
Step 2
Step 1
Bottom Leg
Anchor
Support
Anchor
Support
Anchor
Support
Bottom Leg
Bottom Leg
Middle Leg
Middle Leg
Middle Leg
Middle Leg
Middle
Leg
Middle
Leg
X-Support
Brackets
X-Support
Bracket
X-Support
Bracket
CR9000 FIGURE 3
CR9000
FIGURE 3A
Step 6
Step 3
STEP 2.
Attach the
X-supports
by securing one to each top bracket using
(6) 5/16” x 1 1/4” hex bolts [D] and (6) 5/16” nylock nuts. Then, connect the
X-supports
to the brackets at the bottom and secure using (6) 5/16” x 1 1/4”
hex bolts [D] and (6) 5/16” nylock nuts (Fig. 4).
NOTE:
X-supports shall form
a “V” shape and be intertwined. Also,
X-supports
shall be secured to the
concave side of the bracket for a proper fit (Fig. 4A).
WARNING!
Never attempt to use this product(s) without X-supports
or any component of this tripod. Failure to follow these instructions
may result in serious injury or death!
STEP 3. SECURELY TIGHTEN ALL NUTS AND BOLTS.
STEP 4.
REQUIRES (THREE (3) TOTAL) ADULTS. Lift the platform and walk the
tripod up until erect.
WARNING!
Do not use this tripod on soft ground or during extremely
windy weather conditions. Failure to follow these instructions may
cause serious injury or death!
Your tripod is now ready for use. Refer to pages 8-9,
Field Installation
, for
installation instructions.
6
Содержание The Apex CR9000
Страница 10: ...10 NOTES ...
Страница 12: ......