12. Connect the power cable after the system has been installed.
13. Before powering on the system, be sure the power cable is
connected into the power socket well.
14. Turn off the system for 25 minutes after running constantly for
three hours, ensure that the system is able to cool down in a suitable
environment.
15. Turn on the computer after the laser display system is on,
or you must power on the computer again.
16. When to be transported, use the original package to avoid
Shaking.
17.
This sign indicates separate collection for electronics and
electrical equipment.
Inspection information
In order to use the product securely and properly, please read the
manual before using and follow the instructions strictly to prevent
personal safety trouble and product damage caused by misuse.
Take care of the product, check the possibility of the product
damage caused by transportation and check all the machine and
listed accessories are present upon receipt of the product
1 x LASER display system 1 x User manual
1 x Power cable
Installation
Be sure that there is no flammable or explosive subjects nearby. The
least clear proximity from the system should be 1.5 meters. At the
same time, keep more than half a meter between the wall and
LASER display system.
Page 2
Maintenance
Clean the lens regularly. Do not use a wet cloth or chemicals; use a
damp cloth. The maintenance period depends of the usage
frequency and surrounding conditions of the LASER display system.
It recommended that the system should be cleaned every 15 days.
Warning
Power off any related system before maintenance.
Declare
The end-user of this product should abide by the above instructions
and warnings. Performing actions which was advised not to do so as
stated by this manual may void the warranty of this laser display
system.
All products made from Big Dipper Laser Company have anti - fake
identification. please verify the anti-counterfeit label at the bottom
of the case to ensure the interests of consumers.
Page 7