DMX channel setting
Channel NO.
DMX512
value
Content
1
Control
mode
0-63
Shut off the LASER diode
64-127
Sound mode
128-191
Auto mode
192-255
Manual mode
2
Pattern
0-39
Static pattern
40-255
Dynamic pattern
3
Strobe
0-30
No strobe
31-255
Strobe ,8 grade speed
4
Display
0-69
Normal display
70-255
Dot and line display
5
Horizontal
move
0-160
Manual move
161-220
Unilateralism move
221-255
Automatic move around
6
Vertical
move
0-160
Manual move
161-220
Unilateralism move
221-255
Automatic fluctuate (from up to
down and down to up)
7
Zoom
0-2
No zoom
3-90
Manual zoom
91-146
Automatic zoom out
147-200
Automatic zoom in
201-255
Automatic zoom
8
Color
0-99
Red and Green
100-199
Red
200-255
Green
9
Reset
0-255
The channel value is 200 or bigger
than 200, then the system reset.
10 Y-axis
rotation
0-150
Manual rotation
151-255
Auto rotation
11 X-axis
rotation
0-150
Manual rotation
151-255
Auto rotation
12 Z-axis
rotation
0-180
Manual rotation
181-255
Auto rotation
Page 5
14.Before powering on the system, be sure the power cable is
connected into the power socket well.
15.Turn off the system for 25 minutes after running constantly for
three hours, ensure that the system is able to cool down in a
suitable environment.
16.When to be transported, use the original package to avoid
damage.
17.
This sign indicates separate collection for electronics and
electrical equipment
.
Inspection
Check that the following components are present within the package
when receiving system - from the list below:
1 x LASER display system 1 x User manual
1 x Power cable
1 x DMX cable
（
option
）
Installation
1. Be sure that there is no flammable or explosive subjects nearby.
The least clear proximity from the system should be 1.5 meters. At
the same time, keep more than half a meter between the wall and
LASER display system.
2. Be sure the power socket output voltage matches that off the
LASER display system.
Page 2
