DESING QUALITY FODI.003.E PAGE. 2/4
PHOTO
PHOTO
PHOTO
PHOTO 5
5
5
5
4.Position the extension bracket from behind the bumper through the openning as shown PHOTO 3.
Place main bracket over the studs and secure the bracket to the frame using the (2) factory nuts
before removed and ( 1 ) M12x40 hex head bolt, 1/2" flat and lock washers. Do not tighten. PHOTO 4.
M12x40
hex bolt
1/2x1 1/4"
hex Bolt
Ext. bracket
comes out
Tow Hook and
plastic cover.
Auxiliary bracket
comes out
N
OTE:
OTE:
OTE:
OTE: The center channel/tube is installed in the lower position, if you install a winch higher than 11"
you can raise the central channel/tube to the next holes position.
2. If vehicle has factory tow hooks you must remove them. If vehicle has not factory tow hooks you
must remove the plastic cover from the bumper. PHOTO 1.
NOTE:
NOTE:
NOTE:
NOTE: Tow hooks or plastic cover will not be reinstalled.
3. Locate the nuts and studs that secure the bumper bracket to the frame rail. Remove the
(2) lower nuts. PHOTO 2.
PHOTO
PHOTO
PHOTO
PHOTO 3
3
3
3
PHOTO
PHOTO
PHOTO
PHOTO 4
4
4
4
PHOTO
PHOTO
PHOTO
PHOTO 1
1
1
1
PHOTO
PHOTO
PHOTO
PHOTO 2
2
2
2
