Be sure to adequately Lubricate the Screw-shaft and the top thrust Bearing
with the LM Grease provided, Failure to do this will destroy the top bearing
race and may Invalidate your warranty!
NEVER, EVER
, Use Impact/Hammer drives of any description as this will
Destroy the Bronze Lifting Nut and Top Bearing Race possibly leading to
Catastrophic Lift Failure!!!
Once all the above is satisfactorily completed the chosen Mount set to suit your
bike can be positioned on the lifting arm ready for lifting. When the bike is
Raised to full height the Lift also Incorporates a Feature for a Padlock to be
inserted at the point Shown Above for Total Security of your motorcycle!!
Always keep your lift Clean and Dry, A good idea is to use some 15mm
(Copper) pipe insulation from any hardware store to keep the Shaft in pristine
condition. If taken care your lift will give a “Lifetime” of Service!!
Please Remember, Use the lift Only on a Flat and Level Solid Surface.
Alternative 2 SPEED power drills available from B&Q, Wickes &
Screwfix but be sure to look for the “Rotary Dial Speed 1 & 2 machines”
Trigger control 0 to 3000rpm Variable speed machines do NOT have enough Torque and will suffer burnout.
