Banter Kit Instructions
*Charge all units before first-time use.
Belt Pack Function
Hub Function
1
Volume down button
Power button
2
Volume up button
Pairing button
3
PTT button
-
4
Power indicator
Power indicator
5
Status indicator
Status indicator
6
Charge indicator
Charge indicator
7
Headset and charging port
Charging port
Power on and off
All units should come paired with the hub, so should automatically pair with the hub when
powered on. There are pairing instructions below if needed. Power on by briefly pressing the
volume down button. Power off by holding the volume down button for 4 seconds. This is the
same for both hub and body pack units. Power status indicated by Power LED.
Power LED colour
Meaning
Green
On with good battery
Amber
On with low battery
Red
On with critical battery warning
None
Off
Use latch PTT on headset to talk over the duplex system. Range will be best when belt pack is
worn higher up on the body.
