Big Bear BBB202SHR, Инструкция по безопасности и эксплуатации

Страница: 11 / 16

2500W SHREDDER BBB202SHR
OPERATION
Checking the plate hopper and
blade
(Fig I-J)
Fig I
Fig J
Warning! Always wear glove
when cleaning or replacing
blade.
1. Ensure the switch is turned off,
disconnect the plug from mains
2. Unscrew the knob anticlockwise and
open the hopper.
3. Clean cut and discharge area and
remove wood sticks or objects with may
clog the blades.
4. Check the blade, when you find the
blade was damaged or blunt, Call help
line to get the spare blade.
5. Re-place the hopper and tighten up the
knob before operate the machine.
Blade replacement
(See Fig K)
Fig K
The reversible blade are fixed to rotary
plate with two screws, before any
maintenance or cleaning work on the
blades, always turn the switch off and
disconnect the plug from the mains.
Warning! The blade replacement
should be carried out by qualified
people. Regrinding or Sharpening
of the blades is not recommended
unless completed by a service agent
or a similarly qualified person.
Align the slots on the board and the blade
support; insert the end of the supplied
spanner into slots to prevent rotating
when replacing the blade, then use the
supplied hex key to unscrew the screws.
Note: Always use the original spare
part for replacement.
Shredding material
(See Fig L)
Fig L
Feed the material to be chopped into
the right side of the feeding funnel, the
material is pulled in by the cutting blade
automatically.