BIG BALE Transtacker, Руководство по эксплуатации и обслуживанию

Страница: 42 / 67

42
Manual Stack Table Lower
Speed
The speed the Stack Table
Lowers.
100
Manual Stack Table Rotate
Speed
The Speed the Stack Table
Rotates both CW and ACW.
100
Trailer Settings Manual Raise Trailer Speed Speed the Trailer Raises. 100
Manual Lower Trailer Speed Speed the Trailer Lowers. 100
To alter a setting, select the corresponding button (as shown in Figure 57). For Example, press the
‘ Clamp Settings ’ button and you will see the screen shown in Figure 58. The arrow to the right shows
which setting you have selected. To select a different setting, use the top two right buttons to scroll
up and down the settings. To increase and decrease the value, use the bottom right two buttons. The
plus increases the speed and the minus symbol decreases the speed.
Figure 58: Screen Showing Manual Clamp Settings
6.3.2 Auto Settings
These are the settings that control the automated functions such as; ‘ Auto-Pickup ’ , ‘ Auto-Stack ’ ,
‘ Auto-Tip Bed Down ’ and ‘ Road Mode ’ . Altering these settings incorrectly can cause issues with the
automated sequences and therefore it is advised that you make a note of the settings before making
any alterations in case of any issues with the automated functions where it would be necessary to
revert back to the original settings.
NOTE : The speed of the hydraulics will vary depending on the PTO speed and temperature of the oil.
Therefore, altering settings when the oil is at working temperature may affect function of machine
when oil is cold.