background image

Isis

®

WWW.BIGASSFANS.COM     ©2011 DELTA T CORP.     DBA BIG ASS FAN CO.     ALL RIGHTS RESERVED

To: Big Ass Fan Company

The undersigned understands and acknowledges receipt of the Warranty Claim Form and Instructions and agrees that Big Ass Fan 

Company has the right, upon receipt of returned merchandise, to make final determination as to whether this merchandise should be 

replaced at no cost under Big Ass Fan Company’s stated warranty policy.

The undersigned further agrees that if Big Ass Fan Company determines that this merchandise does not qualify under its stated 

warranty policy, Big Ass Fan Company can invoice for the replacement merchandise, plus shipping and handling for the original part 

and all replacements, and such invoice will be paid within 15 days of receipt of the same.

The undersigned agrees to ship to Big Ass Fan Company’s location at 2425 Merchant Street, Lexington, KY 40511 all of the 

merchandise replaced by Big Ass Fan Company, including, but not necessarily limited to, defective or failed components, within 10 

working days of the receipt of the any replacements.

The undersigned further agrees that if said replaced merchandise has not been shipped to Big Ass Fan Company within 10 working 

days, Big Ass Fan Company can invoice for the replacement merchandise plus shipping and handling, and the invoice will be paid 

within 15 days of receipt.

Signed:

                                                                                                                       

Title:

                                                                                                                            

For:

                                                                                                                             

(Name of Company)

Date:

                                                                                                                           

Responsibility Agreement

2425 Merchant Street 

Lexington, KY 40511 

Phone: 1-877-BIG-FANS 

Fax: (859) 967-1695

www.bigassfans.com

Содержание Isis





























































Отзывы: