7 |
P a g e
VENTAMATIC, LTD.
P.O. Box 728, Mineral Wells, TX 76068-0728 • PHONE 1-800-433-1626 • WWW.BVC.COM
INSTALL COUPLING COVER
˙
Loosen 2 screws from the bottom of the mounting bracket.
˙
Slide the canopy up to the mounting bracket and place the key hole on the canopy over the screw on the
mounting bracket, turn canopy until it locks in place at the narrow section of the key holes, secure it by
tightening the two set screws. Avoid damaging the electrical wiring prepared previously.
˙
Finally attach the Coupling Cover to canopy and secure it by pushing the lugs into the holes.
Fig.
1
1
Fig.
1
2
INSTALL
ING THE LIGHT
˙
While holding the LED Light Kit for your fan, firmly snap the wire connection plugs together.
˙
Raise the LED Light Kit and secure it to the fan by turning the LED Light Kit clockwise until snug.
DO NOT OVERTIGHTEN.
Fig.
1
3